Electrical Outlet Spacers Are An Simple DIY Repair For Unfastened Wall Receptacles!

0 1


This publish could comprise affiliate hyperlinks. If you are going to buy via these hyperlinks, we could earn a small fee at no further price to your self.


As soon as once more, I discovered myself  in the midst of one other residence reworking mission when a small drawback arose.

This time, I discovered one thing new within the course of — earlier than this, I didn’t know something about electrical outlet spacers!

I bumped into this drawback whereas I used to be putting in new beadboard wainscoting in our kitchen and breakfast room.

The electrical shops have been recessed after I put in the wainscoting – and I wasn’t capable of set up the faceplate correctly.

It’s a seemingly apparent drawback, nevertheless it’s one small factor that I hadn’t considered when planning out the mission. (Then once more, if there wasn’t some type of hiccup through the course of a house DIY mission, I wouldn’t know what to do with myself.)

I found that {the electrical} outlet wanted to be pushed ahead by some means, to ensure that it to develop into flush with the beadboard paneling.

I might loosen the screws on {the electrical} outlet to convey it ahead — however that would depart it unfastened and that wasn’t an possibility.

Outlet Spacers To The Rescue

I headed to the house enchancment heart looking for a product that will resolve my little dilemma.

I at all times assume that I’m not the primary individual to have the issue I’ve encountered. Subsequently, I do know that there’ll nearly at all times be a product that can care for my residence reworking drawback. If there’s not a product, then I normally I discover that a bit of improvisation and ingenuity will see me via.

I had one thing in thoughts that will be product of rubber or plastic — for fireplace and security considerations. A UL listed product could be the best way to go for peace of thoughts.

Seems the answer for such a drawback is an inexpensive set of electrical outlet spacers!

TIP: You should definitely minimize the facility to the receptacles on the breaker field previous to putting in the spacers. You are able to do this with the facility on, however you’ll have to know what to the touch and what to not contact. In the event you’re not 100% sure, minimize the facility on the breaker field.

Why You Want Electrical Outlet Spacers

Listed here are a couple of of the causes that you need to use outlet spacers:

  • Unfastened receptacles might lead to arcing.
  • You need that professionally put in look. It’s the small particulars that make all of it come collectively.
  • They supply assist in your shops when plugging in gadgets.
  • A receptacle that’s not flush will lead to cracked or damaged faceplates.
  • You could end up in violation of a constructing code for those who go away your receptacles recessed.

{The electrical} outlet spacers that I bought are Made within the USA and UL listed. These are 2 superb causes to purchase them!

Make certain to not contact the edges of the receptacle. You’ll get a nasty jolt for those who haven’t disabled the electrical energy circulate.

What’s cool about this product is that these spacers will be piggy-backed (similar to Legos) to any desired depth — so for those who’re putting in stone, tile, or rock in your partitions, you possibly can put a couple of of them collectively to make it proper.

Extra DIY House Electrical Suggestions

Like this publish? Reserve it to learn once more later… or share with others on Pinterest!

Leave A Reply

Your email address will not be published.